Toamto Vegetable Late Blight Downy Mildew Fungicide Cyazofamid Fluopicolide 30% Sc

• Customization: Available
• CAS No.: 3160-91-6
• Appearance: Powder
• Model NO.: Moroxydine Hydrochloride 98% TC
• Usage Mode: Protective Agent
• Application Fields: Agricultural Fungicide
• Conductivity: Systemic Fungicide
• Composition: Organic
• Color: Light Yellow Powder
• Transport Package: Drum
• Specification: can customize as per request.
• Trademark: fusen
• Origin: China

Product Description

 

Product Description

1.Identification
1.1GHS Product identifier

Product name

Moroxydine hydrochloride

1.2Other means of identification

Product number	-
Other names	Moroxydine hydrochloride

1.3Recommended use of the chemical and restrictions on use

Identified uses	For industry use only.
Uses advised against	no data available

1.4Supplier's details

Company	Jinan Fusen Bio-chemicals Co., Ltd.
Address	No. 1728, Second Ring East Road, Licheng, Jinan, Shandong, China.
Telephone	[phone]

1.5Emergency phone number

Emergency phone number	[phone]
Service hours	Monday to Friday, 9am-5pm (Standard time zone: UTC/GMT +8 hours).

2.Hazard identification
2.1Classification of the substance or mixture
Skin irritation, Category 2
Eye irritation, Category 2
2.2GHS label elements, including precautionary statements

Pictogram(s)
Signal word	Warning
Hazard statement(s)	H315 Causes skin irritation H319 Causes eye irritation H410 Very toxic to aquatic life with long lasting effects
Precautionary statement(s)
Prevention	P264 Wash hand, face thoroughly after handling. P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response	P302+P352 IF ON SKIN: Wash with plenty of water/... P321 Specific treatment (see ... on this label). P332+P313 If skin irritation occurs: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it before reuse. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice/attention. P391 Collect spillage. P501 Dispose of contents/container to ...the right place
Storage	none
Disposal	none

2.3 Other hazards which do not result in classification
none
3. Composition/information on ingredients
3.1 Substances

Chemical name	Common names and synonyms	CAS number	EC number	Concentration
moroxydine hydrochloride	moroxydine hydrochloride	3160-91-6	none	≥98%

4.First-aid measures
4.1Description of necessary first-aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
4.2Most important symptoms/effects, acute and delayed
no data available
4.3Indication of immediate medical attention and special treatment needed, if necessary
no data available
5.Fire-fighting measures
5.1Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2Specific hazards arising from the chemical
no data available
5.3Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
6.Accidental release measures
6.1Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. For personal protection see section 8.
6.2Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
6.3Methods and materials for containment and cleaning up
Pick up and arrange disposal. Sweep up and shovel. Keep in suitable, closed containers for disposal.
7.Handling and storage
7.1Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Avoid exposure - obtain special instructions before use.Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2.
7.2Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
8.Exposure controls/personal protection
8.1Control parameters
Occupational Exposure limit values
no data available
Biological limit values
no data available
8.2Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
8.3Individual protection measures, such as personal protective equipment (PPE)
Eye/face protection
Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards. 
Skin protection
Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. 
Respiratory protection
Wear dust mask when handling large quantities.
Thermal hazards
no data available
9.Physical and chemical properties

Physical state	Crystalline powder
Colour	White
Odour	None
Melting point/ freezing point	180 ^oC
Boiling point or initial boiling point and boiling range	327 ^oC
Flammability	Not flammable
Lower and upper explosion limit / flammability limit	No data available
Flash point	No data available
Auto-ignition temperature	No data available
Decomposition temperature	>327 ^oC
pH	5.5-8.5
Kinematic viscosity	No data available
Solubility in water	>31.1 µg/ml
Partition coefficient n-octanol/water (log value)	pH 2: -0.63; pH 7: -1.89; pH 10: -1.81 (98.5%)
Vapour pressure	1.85 x 10^-3 Pa
Density and/or relative density	1.52 g/cm^3
Relative vapour density	No data available
Particle characteristics	No data available

10.Stability and reactivity
10.1Reactivity
no data available
10.2Chemical stability
Stable under recommended storage conditions.
10.3Possibility of hazardous reactions
no data available
10.4Conditions to avoid
no data available
10.5Incompatible materials
no data available
10.6Hazardous decomposition products
no data available
11.Toxicological information
Acute toxicity

• Oral: Rat, LD₅₀ >6250 mg/kg
• Inhalation: Rat, LC₅₀ >5.0 mg/l (4h)
• Dermal: Rat, intraperitoneal LD₅₀ >1750 mg/kg; Rat, subcutaneous LD₅₀ >2200 mg/kg

Skin corrosion/irritation
Rabbit, cause skin irritation 
Serious eye damage/irritation
Rabbit, cause eye irritation 
Respiratory or skin sensitization
Guinea pigs, no skin sensitive 
Germ cell mutagenicity
None
Carcinogenicity
None
Reproductive toxicity
None
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
12.Ecological information
12.1Toxicity

• Toxicity to fish: LC₅₀ (96 h) Bluegill sunfish Lepomis macrochirus 0.045 mg/l
• Toxicity to daphnia and other aquatic invertebrates: no data available
• Toxicity to algae: no data available
• Toxicity to microorganisms: no data available

12.2Persistence and degradability
no data available
12.3Bioaccumulative potential
no data available
12.4Mobility in soil
no data available
12.5Other adverse effects
no data available
13.Disposal considerations
13.1Disposal methods
Product
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Contaminated packaging
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
14.Transport information
14.1UN Number

ADR/RID: UN3077

IMDG: UN3077

IATA: UN3077

14.2UN Proper Shipping Name

ADR/RID: Environmentally hazardous substance, solid, n.o.s.

IMDG: Environmentally hazardous substance, solid, n.o.s.

IATA: Environmentally hazardous substance, solid, n.o.s.

14.3Transport hazard class(es)

ADR/RID: 9

IMDG: 9

IATA: 9

14.4Packing group, if applicable

ADR/RID: 3

IMDG: 3

IATA: 3

14.5Environmental hazards

ADR/RID: no

IMDG: no

IATA: no

14.6Special precautions for user
no data available
15.Regulatory information
15.1Safety, health and environmental regulations specific for the product in question

Chemical name	Common names and synonyms	CAS number	EC number
moroxydine hydrochloride	moroxydine hydrochloride	3160-91-6	none
European Inventory of Existing Commercial Chemical Substances (EINECS)			Not Listed.
EC Inventory			Not Listed.
United States Toxic Substances Control Act (TSCA) Inventory			Not Listed.
China Catalog of Hazardous chemicals 2015			Not Listed.
New Zealand Inventory of Chemicals (NZIoC)			Not Listed.
Philippines Inventory of Chemicals and Chemical Substances (PICCS)			Not Listed.
Vietnam National Chemical Inventory			Not Listed.
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC)			Listed.

16.Other information
Information on revision

Creation Date	Aug 11, 2017
Revision Date	Aug 11, 2017

Disclaimer: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. We as supplier shall not be held liable for any damage resulting from handling or from contact with the above product.

 

Product Gallery

Company Profile

Packaging & Shipping

FAQ

Q1: How can I get the new price of a product?
A: Please provide the exact or approximate quantity, packing details, destination port or special requirements, then we could give you the price accordingly.

Q2: How can I get a sample?
A: We can provide free samples for your test.


Q3: How do you garantee the quality?
A: First of all, our quality control will reduce the quality problem to near zero. When the production is finished, they'll take samples from every batch of cargo, and send to our lab for inspection. After passed the inspection, then we will arrange the delivery.


Q4: How about your after-sale service ?
A: If any technical or quality problem after you receive the cargo, you can contact us any time. If the problem caused by us, we will send you free goods for replacement or refund your loss.